Recherchiere Firmenbekanntmachungen und finanzielle Kennzahlen
UK-Förderung (99.433 £): Rapid Prototyping von hochfesten geosynthetischen Grenzflächen Ukri01.05.2015 Forschung und Innovation im Vereinigten Königreich, Großbritannien
Auf einen Blick
Text
Rapid Prototyping von hochfesten geosynthetischen Grenzflächen
| Zusammenfassung | Construction using geosynthetics offer savings both in terms of cost and embodied carbon. However, their application is limited by poor understanding of geosynthetic soil interaction, resulting in at best over conservative designs and at worst failures resulting in uncontrolled contamination and loss of life. This fifteen month project will use digital imaging and rapid prototyping to create higher strength interaction between geosynthetics and adjacent materials, allowing steeper, higher and safer slopes to be constructed, thus facilitating sustainable construction using these materials. In barrier systems, geomembranes are typically placed, as part of multilayer systems, over low permeability clay to create a composite barrier benefiting from the low permeability of the geomembrane and attenuation properties of the clay. The geomembrane is then overlain by a geotextile or sand to project it from puncture and damage from the overlying material. This project will allow design of geomembrane surfaces for interaction with these adjacent materials. The designed interfaces will have greater peak strength and allow designers to understand and specify the characteristics of interface shear strength beyond simply the height of the surface texturing (asperity height). In practical terms it will allow higher and steeper slopes when using geomembrane barrier systems, offering improved project profitability and safer use across all applications. The upper bound interface shear strength is controlled by the material adjacent to it. For a geosynthetic-soil interface this is the strength of the soil. For a geomembrane-geotextile interface the maximum strength will be controlled by the internal bond and fibre strength of the geotextile. The role of the texturing is to transfer the stresses into the adjacent material. The "one size fits all" approach of 0.25mm asperity results in the same texturing being used for interactions with fine grained soils, coarse grained soils and geotextiles and also at low and high confining stresses. The main gaps in knowledge to be addressed are as follows: 1. What are the physical mechanisms that develop peak strength in geomembrane-soil and geomembrane-geosynthetic interfaces? 2. How do these mechanisms differ for interactions with geotextile, coarse grained soil and fine grained soils? 3. Can the nature of the geomembrane surface be designed to better transfer and distribute load, to produce an interface with higher strength? The project will use scanning electron and optical microscopes to study material interaction to determine how peak strength is mobilised and from these studies produce CAD models of high strength interfaces. The CAD models shall be converted into physical models through 3D printing allowing their interaction with soils and geotextiles to be observed and quantified. The work will allow design of geomembrane surfaces for interaction with typically used materials. The designed interfaces will have greater peak strength and allow designers to understand and specify the characteristics of interface shear strength beyond simply asperity height. In practical terms it will allow higher and steeper slopes when using geomembrane barrier systems offering improved project profitability. |
| Kategorie | Research Grant |
| Referenz | EP/M015483/1 |
| Status | Closed |
| Laufzeit von | 01.05.2015 |
| Laufzeit bis | 31.07.2016 |
| Fördersumme | 99.433,00 £ |
| Quelle | https://gtr.ukri.org/projects?ref=EP%2FM015483%2F1 |
Beteiligte Organisationen
| Loughborough University | |
| Geofabrics Limited | |
| Golder Associates | |
| International Geosynthetics Society | |
| URS Infrastructure & Environment UK Ltd |
Die Bekanntmachung bezieht sich auf einen vergangenen Zeitpunkt, und spiegelt nicht notwendigerweise den heutigen Stand wider. Der aktuelle Stand wird auf folgender Seite wiedergegeben: Loughborough University, Loughborough, Großbritannien.
Die Visualisierungen zu "Loughborough University - UK-Förderung (99.433 £): Rapid Prototyping von hochfesten geosynthetischen Grenzflächen"
werden von
North Data
zur Weiterverwendung unter einer
Creative Commons Lizenz
zur Verfügung gestellt.
