Recherchiere Firmen­bekanntmachungen und finanzielle Kennzahlen

UK-Förderung (1.224.535 £): EPSRC-Stipendium in der Fertigung: Kollaborative Messsysteme für die hochwertige Fertigung Ukri01.08.2014 Forschung und Innovation im Vereinigten Königreich, Großbritannien

Auf einen Blick

Text

EPSRC-Stipendium in der Fertigung: Kollaborative Messsysteme für die hochwertige Fertigung

Zusammenfassung To support the development of challenging, difficult to manufacture products, increased reliance is placed on techniques to allow accurate dimensional measurement of parts and components. New measurement systems are needed that provide data quickly with higher levels of accuracy and precision than is currently possible. Currently high accuracy measurements are made using dedicated expensive instrumentation in temperature controlled labs. The wide range of measurement challenges mean there is no single instrument available to suit all needs. In fact, the range of lab based instrument systems required to meet the measurement needs of industry continues to grow. It includes techniques ranging from contact measurements made using a mechanical probe, to non-contact measurements which use light, lasers, or X-ray based measurement methods. The main drawback of these systems is that they are usually slow to set-up, and significant time is required to take measurements. This means that although they are very accurate they are less useful for the control and improvement of challenging manufacturing processes, where data must be collected and analysed quickly. Improved measurement systems are required which provide higher speed measurements, at lower cost, without compromising accuracy. Currently two approaches address this need. One approach uses on machine sensors to provide high-speed measurements, while the other approach is to position instruments closer to the manufacturing environment to reduce the time required to transfer work to the measurement lab. Both approaches have obvious benefits as they provide faster data; however, they are also less accurate as a result of the unwanted disturbances experienced on the factory floor. These limitations result in a trade-off: the user can either have high accuracy, or high speed measurement, but not both at once. The research undertaken within this Fellowship will develop a new way of collecting and effectively processing critical measurement data. Instead of a reliance on high accuracy instruments, this approach will provide a new way of thinking with respect to how measurement systems are designed and implemented. The goal will be to allow different types of lower accuracy data to be combined in a beneficial way. For example, computer simulations of a machine, product, and process will be combined with sensors that monitor environmental conditions. In addition sensors used to take high speed measurements of parts during the manufacturing process itself will be used. Through a collaborative process these data will be combined to provide fast high quality data. To verify and further improve the system a small quantity of accurate feedback data from high accuracy instruments in temperature controlled labs will be used. In effect the approach will be to combine slow accurate data, with fast less reliable data, to produce enhanced accuracy fast measurements. For example, if a batch of high precision components must be produced, the components must also have their geometry verified and corrected if required. On machine sensors may be used to verify geometry, but accuracy is limited due to environmental effects such as temperature and humidity. To compensate for these errors a collaborative measurement system will initially make measurements using both on-machine sensors as well as off-machine lab instruments. It will blend these data sets in addition to data from on-machine environmental monitoring sensors, and computer simulations to correct for errors and therefor enhance the accuracy of the measurements. The system will automatically adapt to changing environmental conditions by triggering the need for more lab-based data which will allow an improved error correction to be made. In this way the system will adapt and optimise the measurement process to suit the current manufacturing conditions.
Kategorie Fellowship
Referenz EP/L01498X/1
Status Closed
Laufzeit von 01.08.2014
Laufzeit bis 29.02.2020
Fördersumme 1.224.535,00 £
Quelle https://gtr.ukri.org/projects?ref=EP%2FL01498X%2F1

Beteiligte Organisationen

Loughborough University
The Manufacturing Technogy Centre
University of Nottingham
University of Huddersfield
Granada University
Carl Zeiss Ltd
National Physical Laboratory NPL
Solarton Metrology UK
University of the West of England
Bruker UK Ltd
WLR Prototype Engineers Ltd
Rolls-Royce Plc
Destaco

Die Bekanntmachung bezieht sich auf einen vergangenen Zeitpunkt, und spiegelt nicht notwendigerweise den heutigen Stand wider. Der aktuelle Stand wird auf folgender Seite wiedergegeben: Loughborough University, Loughborough, Großbritannien.

Creative Commons Lizenzvertrag Die Visualisierungen zu "Loughborough University - UK-Förderung (1.224.535 £): EPSRC-Stipendium in der Fertigung: Kollaborative Messsysteme für die hochwertige Fertigung" werden von North Data zur Weiterverwendung unter einer Creative Commons Lizenz zur Verfügung gestellt.